Dell S3845cdn, Руководство пользователя

Страница: 216 / 612

216
| Loading Documents
Loading Documents
You can use the Duplex Automatic Document Feeder (DADF) or the document glass to
load a document. Using the DADF, you can load up to 50 sheets of 80 g/m
2
(20 lb) paper
at a time. Using the document glass, you can load one sheet at a time.
NOTE:
• To get the best scan quality, especially for color or gray scale images, use the document glass
instead of the DADF.
Before Loading Documents in the DADF
The following instructions describe how to avoid paper jams:
• Do not use document smaller than 139.7 mm by 139.7 mm (5.5 inches by 5.5 inches)
and larger than 215.9 mm by 355.6 mm (8.5 inches by 14 inches).
• Do not use booklets, pamphlets, photographs, transparencies, and documents
having other unusual characteristics.
• Do not use carbon or carbon-backed paper, coated paper, onion skin or thin paper,
wrinkled or creased paper, curled or rolled paper, and torn paper.
• Do not use documents with staples or paper clips.
• Do not use documents exposed to adhesives or solvent based materials such as glue,
ink and correcting fluid.
• Do not use document that you have cut or trimmed.
• Do not use wrinkled, creased, damp, or curled document.
• Do not mix different sizes, weights, or types of document in the DADF.
• Flex, fan, and straighten document before you load it.
• Do not overload the DADF. Make sure that the document stack height does not
exceed the maximum height indicated by the load-line labels in the DADF.
• If jams caused by misfeeding paper occur frequently, wipe the DADF feed rollers with
a cloth moistened with water.
• Do not apply excessive pressure on the DADF cover or subject it to strong impact.
Loading a Document in the DADF
1 Adjust the document guides according to the document size that you want to load,
and place the document(s) facing up with the top edge of the document(s) first into
the DADF.