Dell S2830dn Скачать руководство пользователя страница 98

Страница: 98 / 153

Clearing jams

Note:

Jam Recovery is set to Auto by default. The printer reprints jammed pages unless the memory

required to hold the pages is needed for other printer tasks.

Avoiding jams

Load paper properly

•

Make sure paper lies ﬂat in the tray.

Correct loading of paper Incorrect loading of paper

•

Do not remove a tray while the printer is printing.

•

Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.

•

Do not load too much paper. Make sure the stack height is below the maximum paper ﬁll indicator.

•

Do not slide the paper into the tray. Load paper as shown in the illustration.

•

Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing
tightly against the paper or envelopes.

•

Push the tray ﬁrmly into the printer after loading paper.

Clearing jams

Содержание S2830dn


























































































































































Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды

Dell S2830dn, Руководство пользователя

Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды