Dell S2830dn Скачать руководство пользователя страница 127

Страница: 127 / 153

Action

Yes

Step 1

Print a font sample list to check if the fonts you are using are
supported by the printer.

From the control panel, navigate to:

Menus

Reports

Print Fonts

Select

PCL Fonts

PostScript Fonts

Resend the print job.

Are you using fonts that are supported by the printer?

Go to step 2.

Select a font that is
supported by the
printer.

Step 2

Check if the fonts installed on the computer are supported by the
printer.

Are the fonts installed on the computer supported by the printer?

The problem is
solved.

Contact

technical

support

Printer is printing blank pages

Action

Yes

Step 1

Check if there is packing material left on the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Check if the packing material is properly removed from the
imaging unit.

Warning—Potential Damage:

Do not expose the imaging

unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.

Reinstall the imaging unit, and then the cartridge.

Resend the print job.

Is the printer still printing blank pages?

Go to step 2.

The problem is
solved.

Troubleshooting

127

Содержание S2830dn


























































































































































Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды

Dell S2830dn, Руководство пользователя

Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды