Dell S2422HZ Скачать руководство пользователя страница 7

Страница: 7 / 80

About your monitor

Product features

The

Dell S2422HZ/S2722DZ

monitor has an active matrix, Thin-Film Transistor

(TFT), Liquid Crystal Display (LCD), and LED backlight. The monitor features include:

• S2422HZ:

60.47 cm (23.8 in.) active area display (measured diagonally) 1920 x

1080 (16:9) resolution, plus full-screen support for lower resolutions.

• S2722DZ:

68.47 cm (27.0 in.) active area display (measured diagonally) 2560 x

1440 (16:9) resolution, plus full-screen support for lower resolutions.

•

Tilt, swivel, pivot, and vertical extension adjustment capabilities.

•

Speakers (2 x 5 W).

•

Pedestal stand and Video Electronics Standards Association (VESA) 100 mm
mounting holes for flexible mounting solutions.

•

Ultra-thin bezel minimizes the bezel gap during multi-monitor usage, enabling
easier setup with an elegant viewing experience.

•

Extensive digital connectivity with DP helps future-proof your monitor.

•

Single USB-C to supply power to compatible computer while receiving video
signal.

•

Camera can support 2560 x 1920 resolution.

•

Plug and play capability if supported by your computer.

•

On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.

•

Power and OSD buttons lock.

•

Security lock slot.

•

≤ 0.3 W in Standby Mode.

•

Premium Panel Exchange for peace of mind.

•

Optimizes eye comfort with a flicker-free screen and minimizes hazard blue light
emission.

•

Uses Low Blue Light panel and is compliant with TUV Rheinland (Hardware
Solution) at factory reset/default setting model.

•

Decreases the level of hazard blue light that is emitted from the screen to make
viewing more comfortable for your eyes.

•

Adopts Flicker-Free technology, which clears the eye visible flicker, brings comfort
viewing experience and prevents you suffering from eye strain and fatigue.

•

Certified for Windows Hello

(Face Authentication) and supports Microsoft

Cortana.

•

Supports AMD FreeSync technology. AMD Freesync certified range from 48 Hz -
75 Hz.

WARNING: The possible long-term effects of blue light emission from the

monitor may cause damage to the eyes, including eye fatigue, or digital
eye strain.

Содержание S2422HZ

















































































Результаты поиска

Содержание S2422HZ

Отзывы:

Похожие инструкции для S2422HZ

Бренды по названию

Популярные бренды

Dell S2422HZ, Руководство пользователя

Результаты поиска

Содержание S2422HZ

Отзывы:

Похожие инструкции для S2422HZ

Бренды по названию

Популярные бренды