Dell PS6000, Обслуживание оборудования

Страница: 13 / 50

PS6000 Hardware Maintenance Basic Array Information
1–5
Using an Electrostatic Wrist Strap
When handling the array chassis, disks, or control modules, you must use an
electrostatic protection device to prevent electrostatic discharge.
An electrostatic wrist strap is included in the shipping box.
Figure 1-4: Electrostatic Wrist Strap
Shutting Down and Restarting an Array
A PS6000 array includes redundant, hot-swappable disks, power supplies, and
control modules (if a dual control module array). You can remove a redundant
component without affecting operation if a functioning component is available.
Otherwise, it is recommended that you cleanly shut down the array and turn off
power before removing a component.
Note: When an array is shut down, any volumes with data on the array will be set
offline until the array is successfully restarted. This may affect initiators
that are connected to the volumes.
Serial number
label
N/A This label contains the serial number for your array. If
you contact your PS Series support provider, you may
need to provide this number.
Table 1-2: Operations Panel Descriptions (Continued)
Item Status Description