Hard drive interposer board
Removing the hard drive interposer board
1
Follow the procedures in
Before working inside your computer
.
2
Remove the:
a
b
c
3
To remove the hard drive interposer board:
a Remove the single (M2.0x3.0) and the single (M2.0x5.0) screw that secures the hard drive interposer board to the hard drive
interposer board holder [1].
b Remove the hard drive interposer board from the system [2].
c Remove the 3 (M2.0x3.0) screws that secure the hard drive interposer board holder to the system [3].
d Remove the hard drive interposer board holder from the system [4].
Installing the hard drive interposer board
1
To install the hard drive interposer board:
a Align the hard drive interposer board holder into its position on the system [1].
b Replace the 3 (M2.0x3.0) screws to secure the hard drive interposer board holder to the system [2].
c Place the hard drive interposer board into its position on the hard drive interposer board holder [3].
d Replace the single (M2.0x3.0) and the single (M2.0x5.0) screw to secure the hard drive interposer board to the hard drive
interposer board holder [4].
Removing and installing components
25
Содержание Precision 7730
