5.
Remove the data-cable connector [1] and then slide out the two end brackets [2].
Installing the Hard Drive
1.
Replace the hard-drive covers on the hard drive.
2.
Connect the hard-drive interposer to the hard-drive assembly.
3.
Place the hard-drive assembly on the palm-rest assembly.
4.
Connect the hard-drive cable to the system board.
5.
Align the screw holes on the hard-drive cage with the screw holes on the hard-drive assembly.
6.
Replace the screws that secure the hard-drive cage to the palm-rest assembly.
7.
Install the:
a. battery
b. base cover
8.
Follow the procedures in
After Working Inside Your Computer.
Removing the Speakers
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a.
base cover
b.
battery
3.
Perform the following steps to remove the speaker:
a. Disconnect the speaker cable from the system board [1].
b. Remove the screws that secure the speakers to the computer [2].
c. Lift the speakers, along with the speaker cable, off the computer [3].
12
