background image

Option

Description

• Internal SDD
• Internal mSATA
• Internal eMMC

BIOS Recovery

This enablesthe user to recover from certain corrupted BIOS conditions 
from a recovery file on the user primary hard drive or an external USB 
key. This options is enabled by default.
• Enable Recovery from Hard Drive

Table 13. System logs

Option

Description

BIOS events

Displays the system event log and allows you to clear the log.

Thermal Events

Displays the thermal event logs and allows you clear the thermal event 
log.

Power Events

Displays the power event logs and allows you clear the power event log.

Updating the BIOS 

It is recommended to update your BIOS (system setup), on replacing the system board or if an update is 

available. For laptops, ensure that your computer battery is fully charged and connected to a power 

outlet.

1.

Restart the computer.

2.

Go to 

dell.com/support

.

3.

If you have your computer's Service Tag or Express Service Code:

NOTE: To locate the Service Tag, click 

Where is my Service Tag?

NOTE: If you cannot find your Service Tag, click 

Detect Service Tag

. Proceed with the 

instructions on screen.

4.

Enter the 

Service Tag

 or 

Express Service Code

 and click 

Submit

.

5.

If you are unable to locate or find the Service Tag, click the Product Category of your computer.

6.

Choose the 

Product Type

 from the list.

7.

Select your computer model and the 

Product Support

 page of your computer appears.

8.

Click 

Drivers & Downloads

.

9.

On the Drivers and Downloads screen, under the 

Operating System

 drop-down list, select

 BIOS

.

10.

Identify the latest BIOS file and click 

Download File

.

11.

Select your preferred download method in the 

Please select your download method below 

window

; click

 Download File

.

The 

File Download

 window appears.

12.

Click 

Save

 to save the file on your computer.

13.

Click 

Run

 to install the updated BIOS settings on your computer.

Follow the instructions on the screen.

49

Содержание Precision 17 7710































































Отзывы: