Installing the display bezel
1.
Connect the eDP cable.
2.
Align the display panel and tighten the screws to secure display panel to the display cover.
3.
Slide the display bezel from the bottom and press on the display bezel.
4.
Work around the entire bezel until it snaps onto the display assembly.
5.
Install the:
a.
b.
c.
d.
e.
f.
g.
6.
After working inside your computer
Removing the camera
1.
Before working inside your computer
2.
Remove the:
a.
b.
c.
d.
e.
f.
g.
h.
3.
Perform the following steps as shown in the illustration.
a. Disconnect the camera cable from the computer [1].
b. Remove the camera module from the computer [2].
32
