Dell PowerVault NX3200 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 133

background image

Menu Item

Description

Port D

Auto enables BIOS support for the device attached to SATA port D. By default, Port D is set to Auto.

Port E

Auto enables BIOS support for the device attached to SATA port E. By default, Port E is set to Auto.

Port F

Auto enables BIOS support for the device attached to SATA port F. By default, Port F is set to Auto.

NOTE: Ports A, B, C, and D are used for the backplane drives, port E for the optical drive (CD/DVD), and port F for
the tape drive.

Boot Settings Screen

Menu Item

Description

Boot Mode

Allows you to set the boot mode of the system.

CAUTION: Switching the boot mode may prevent the system from booting if the operating
system is not installed in the same boot mode.

If the operating system supports UEFI, you can set this option to UEFI. Setting this field to BIOS
allows compatibility with non-UEFI operating systems. By default, the Boot Mode option is set to
BIOS.

NOTE: Setting this field to UEFI disables BIOS Boot Settings menu. Setting this field to BIOS
disables the UEFI Boot Settings menu.

Boot Sequence
Retry

Allows you to enable or disable the boot sequence retry feature. If this field is enabled and the
system fails to boot, the system reattempts the boot sequence after 30 seconds. By default, the
Boot Sequence Retry option is set to Disabled.

BIOS Boot
Settings

Allows you to enable or disable BIOS Boot options.

NOTE: This option is enabled only if the boot mode is BIOS.

UEFI Boot
Settings

Allows you to enable or disable UEFI Boot options.

NOTE: This option is enabled only if the boot mode is UEFI.

One-Time Boot

Allows you to enable or disable a one-time boot from a selected device.

Integrated Devices Screen

Menu Item

Description

Integrated RAID
Controller

Allows you to enable or disable the integrated RAID controller. By default, the Integrated RAID
Controller option is set to Enabled.

User Accessible
USB Ports

Allows you enable or disable the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports and selecting All Ports Off disables both front and back USB ports.
By default, the User Accessible USB Ports option is set to All Ports On.

Internal USB Port

Allows you to enable or disable the internal USB port. By default, the Internal USB Port option is
set to On.

22

«
...
20
21
22
23
24
...
»

Содержание PowerVault NX3200






































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerVault NX3200

Бренд: Gigabyte Страницы: 26

Бренд: ZIEHL-ABEGG Страницы: 84

Бренд: Uplift Desk Страницы: 4

Бренд: Kontron Страницы: 68

7012 300 Series

Бренд: IBM Страницы: 148

Бренд: Casio Страницы: 143

Бренд: Vivo Страницы: 5

Бренд: Asus Страницы: 66

Essentio CM5571

Бренд: Asus Страницы: 122

Бренд: Asus Страницы: 130

Essentio CM5675

Бренд: Asus Страницы: 71

Essentio CG1330

Бренд: Asus Страницы: 71

Essentio CM5671

Бренд: Asus Страницы: 71

Бренд: Asus Страницы: 166

Бренд: Asus Страницы: 134

Бренд: Asus Страницы: 140

Бренд: Asus Страницы: 178

Бренд: Asus Страницы: 182

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды