Dell PowerVault NX3100 Скачать руководство пользователя страница 157

Страница: 157 / 164

Getting Help

157

Getting Help

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE:

If you do not have an active Internet connection, you can find contact

information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or
customer service issues:

Visit

support.dell.com

Verify your country or region in the

Choose A Country/Region

drop-down

menu at the bottom of the page.

Click

on the left side of the page.

Select the appropriate service or support link based on your need.

Choose the method of contacting Dell that is convenient for you.

book.book Page 157 Wednesday, March 3, 2010 10:37 AM

Содержание PowerVault NX3100





































































































































































Результаты поиска

Содержание PowerVault NX3100

Отзывы:

Похожие инструкции для PowerVault NX3100

Бренды по названию

Популярные бренды

Dell PowerVault NX3100, Руководство владельца оборудования

Результаты поиска

Содержание PowerVault NX3100

Отзывы:

Похожие инструкции для PowerVault NX3100

Бренды по названию

Популярные бренды