Dell PowerVault NX300, Руководство владельца оборудования

Страница: 72 / 192

72
Using the System Setup Program and UEFI Boot Manager
System and Setup Password Features
NOTE:
For a forgotten password, see "Disabling a Forgotten Password" on
page 174.
Your system is shipped without the system password feature enabled in BIOS. The
password features provide a basic level of security for the data on your system.
CAUTION:
Anyone can access the data stored on your system if the system is
running and unattended.
Using the System Password
When a system password is assigned, the system prompts for the system
password after the system starts and only those with the password have full
use of the system.
Assigning a System Password
Before assigning a system password, enter the System Setup program and
check the
System Password option.
When a system password is assigned, System Password is Enabled .
If Password Status is Unlocked , you can change the system password.
If Locked , you cannot change the system password. Disabling the password
jumper on the system board sets System Password to Disabled , and you
cannot change or enter a new system password.
When a system password is not assigned and the password jumper on the
system board is in the enabled position,
System Password is Not Enabled and
Password Status is Unlocked . To assign a system password:
1
Verify that Password Status is Unlocked .
2
Highlight the System Password option and press <Enter>.
3
Type your new system password.
You can use up to 32 characters in your password.
As you type, placeholders appear in the field.
The password assignment is not case-sensitive. To erase a character, press
<Backspace> or the left-arrow key.
NOTE:
To escape from the field without assigning a system password, press
<Enter> to move to another field, or press <Esc> prior to completing step 5.
book.book Page 72 Thursday, August 13, 2009 7:27 AM