
The Controller Restart and Shut Down panel opens.
4. Select the Shut Down operation.
5. Select the controller module to shut down:
A
,
B
, or
both
.
6. Click
Apply
. A confirmation panel appears.
7. Click
Yes
to continue; otherwise, click
No
. If you clicked
Yes
, a message describes shutdown activity.
NOTE:
●
If an iSCSI port is connected to a Microsoft Windows host, the following event is recorded in the Windows event log:
Initiator failed to connect to the target.
●
See the
Dell PowerVault ME5 Series Storage System Administrator’s Guide
for additional information.
Using the CLI
1. Log-in to the CLI.
2. In your dual-controller system, verify that the partner controller is online by running the command: show controllers
3. Shut down the failed controller—A or B—by running the command:
shutdown a
or
shutdown b
The blue OK to Remove LED (back of enclosure) illuminates to indicate that the controller module can be safely removed.
4. Illuminate the white Identify LED of the enclosure that contains the controller module to remove by running the command:
set led enclosure 0 on
The Display LED on the Ops panel located on the enclosure left ear will be blinking green when the
set led enclosure 0
on
command is invoked.
NOTE:
See the
Dell PowerVault ME5 Series Storage System CLI Guide
for additional information.
Verifying component failure
Select from the following methods to verify component failure:
●
Use the PowerVault Managerto check the health icons/values of the system and its components to either ensure that
everything is okay, or to drill down to a problem component. The PowerVault Manager uses health icons to show OK,
Degraded, Fault, or Unknown status for the system and its components. If you discover a problem component, follow the
actions in its Recommendation field to resolve the problem.
●
As an alternative to using the PowerVault Manager, you can run the CLI show system command to view the health of the
system and its components. If any component has a problem, the system health will be
Degraded
,
Fault
, or
Unknown
. If
you discover a problem component, follow the actions in its Health Recommendations field to resolve the problem.
●
Monitor event notification — With event notification configured and enabled, use the PowerVault Manager to view the
event log, or run the CLI show events detail command to see details for events.
●
Check Fault LED (back of enclosure on controller module or IOM face plate): Amber = Fault condition.
●
Check that the OK LED (back of enclosure) is off.
Customer-replaceable units (CRUs)
The following tables describe the types of ME5 Series controller enclosures:
NOTE:
See
on page 14 for views of controller
module and IOM CRUs used in the different enclosure form factors supported by ME5 Series storage systems.
Table 26. ME5 Series 2U controller enclosure models
Model
Description
Form factor
Drives
ME5012
Fibre Channel (32 Gb/s) SFP
2U12
Up to 12 3.5" (LFF) drives
ME5012
iSCSI (25 GbE) SFP
2U12
Up to 12 3.5" (LFF) drives
ME5012
iSCSI 10Gbase-T (10 Gb/s or 1 Gb/s)
1
2U12
Up to 12 3.5" (LFF) drives
ME5012
Mini-SAS HD (12 Gb/s)
2
2U12
Up to 12 3.5" (LFF) drives
46
Module removal and replacement