Installing the cooling shroud
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the cooling shroud to service other components inside the system.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Ensure that the cooling shroud is removed. See the Removing the Cooling Shroud section.
Pressing the release latches, lower the cooling shroud into the system until the tabs on the sides of
the release latches engage with the slots on the sled chassis.
Figure 12. Installing the cooling shroud
1.
cooling shroud
2. release latch (2)
Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Removing the cooling shroud
Before working inside your system
After working inside your system
Processor blank and DIMM blank
The processor blank and DIMM blank supplied with your system aids in directing airflow over the unused
processor sockets and DIMM slots.
CAUTION: If you are permanently removing a processor, you must install a socket protective cap
and a processor blank and DIMM blank in the vacant socket to ensure proper system cooling. The
processor blank and DIMM blank covers the vacant sockets for the DIMMs and the processor.
62