Chassis weight
Table 9. Chassis weight
System
Maximum weight
PowerEdge C4130
20.2 kg (44.53 lb)
Processor specifications
The PowerEdge C4130 system supports up to two Intel Xeon E5-2600 v4 product family processors.
PSU specifications
Table 10. PSU specifications
PSU
Class
Heat dissipation
(maximum)
Frequency
Voltage
1100 W AC
Platinum
4100 BTU/hr
50/60 Hz
100–240 V AC,
autoranging
1600 W AC
Platinum
6000 BTU/hr
50/60 Hz
200–240 V AC,
autoranging
2000 W AC
Platinum
7500 BTU/hr
50/60 Hz
200–240 V AC,
autoranging
NOTE: Heat dissipation is calculated by using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase
voltage not exceeding 230 V.
System battery specifications
The PowerEdge C4130 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The PowerEdge C4130 system supports PCI express (PCIe) generation 3 expansion cards, which need to
be installed on the system board by using expansion card risers. This system supports four expansion card
riser configurations. The following table provides detailed information about the expansion card riser
configurations:
Table 11. Expansion card riser configurations
Expansion card
riser
PCIe slots on the
riser
Height
Length
Link
Configuration 1
Slot 1
half height
half Length
x8
Slot 2
half height
half Length
x16
24