Item
Indicator,
button,
or
connecto
r
Icon
Description
NOTE: On ACPI-compliant operating systems, turning off
the system using the power button causes the system to
perform a graceful shutdown before power to the system
is turned off.
4
System
identificat
ion
button
The identification button on the front and back panels can be
used to locate a particular system within a rack. When one of
these buttons is pressed, the corresponding system
identification button on the back flashes until one of the
buttons is pressed again.
Press the system identification button to turn the system ID on
or off.
If the system stops responding during POST, press and hold
the system ID button for more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup), press and
hold the button for more than 15 seconds.
5
Control
panel
Consists of the health indicator, ambient air temperature
sensor, power-on indicator, power button, and the system
identification button.
Related Links
Back panel
Figure 3. Back panel– PowerEdge C4130
1.
System identification button
2.
NMI button
3.
iDRAC8 Enterprise port
11
