7-24
Installation and Troubleshooting Guide
6.
Check the diskette drive cabling.
Is the diskette drive securely connected to the diskette-drive interface cable
connector?
Is the diskette-drive interface cable securely connected to the interface connec-
tor (labeled “DISKETTE”) on the system board?
Is the drive's DC power cable firmly connected to the drive?
Yes.
Go to step 8.
No.
Go to step 7.
7.
Reconnect the DC power cable connector.
8.
Replace the computer cover, reconnect the system to the electrical outlet, and
turn on the system.
9.
Run the
Diskette Drives
test group in the Dell Diagnostics to determine whether
the diskette drive subsystem now works correctly.
See Chapter 5, “Running the Dell Diagnostics,” for more information.
Did the tests run successfully?
Yes.
You have fixed the problem.
No.
Go to step 10.
10. Repeat steps 4 and 5, and remove all expansion cards.
See “Removing an Expansion Card” in Chapter 8, for instructions.
11. Replace the computer cover, reconnect the system to the electrical outlet, and
turn on the system.
12. Run the
Diskette Drives
test group in the Dell Diagnostics to determine whether
the diskette drive subsystem now works correctly.
Did the tests run successfully?
Yes.
An expansion card may be conflicting with the diskette drive logic, or you
may have a faulty expansion card. Repeat steps 1, 2, and 3.
No.
Go to step 13.
13. Repeat steps 4 and 5, and reinstall one of the expansion cards you removed in
step 10.
See “Installing an Expansion Card” in Chapter 8, for instructions.
14. Replace the computer cover, reconnect the system to the electrical outlet, and
turn on the system.
905grbk0.book Page 24 Friday, September 1, 2000 9:30 AM
