Dell PowerConnect M6220, Руководство по настройке пользователя

Страница: 831 / 1294

Configuring Link Aggregation
831
Configuring Link Aggregation Groups
Beginning in Privileged EXEC mode, use the following commands to add
ports as LAG members and to configure the LAG hashing mode.
Command Purpose
configure
Enter global configuration mode.
interface interface
Enter interface configuration mode for the specified port.
The
interface
variable includes the interface type and
number, for example gigabitethernet 1/0/3 .
You can also specify a range of ports with the interface
range
command, for example,
interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
channel-group port-
channel-number
mode
{
on
|
auto
}
Add the port(s) to the LAG specified with the
port-
channel-number
value. Use the auto keyword to add the
port(s) as dynamic members, or use
on
to specify that the
LAG membership is static.
•
port-channel-number
— Number of a valid port-channel
for the current port to join.
• on — Forces the port to join a channel without LACP
(static LAG).
•
active
— Forces the port to join a channel with LACP
(dynamic LAG).
exit Exit to Global Config mode.
interface port-channel
number
Enter interface configuration mode for the specified LAG.
You can also specify a range of LAGs to configure with the
interface range port-channel command, for example,
interface range port-channel 1-3,10
configures LAGs 1, 2,
3, and 10.