Dell PowerConnect M6220, Руководство по настройке пользователя

Страница: 684 / 1294

684
Discovering Network Devices
4
Exit to Privileged EXEC mode and view the LLDP settings for the switch
and for interface 1/0/3.
console(config-if-Gi1/0/3)#
<CTRL + Z>
console#
show isdp
Timer....................................45
Hold Time................................60
Version 2 Advertisements.................Enabled
Neighbors table time since last change...00 days
00:00:00
Device ID................................none
Device ID format capability........ Serial Number,
Host Name
Device ID format.................. Serial Number
console#
show isdp interface gi1/0/3
Interface Mode
--------------- ----------
Gi1/0/3 Enabled
Configuring LLDP
This example shows how to configure LLDP settings for the switch and to
allow Gigabit Ethernet port 1/0/3 to transmit all LLDP information available.
To configure the switch:
1 Configure the transmission interval, hold multiplier, and reinitialization
delay for LLDP PDUs sent from the switch.
console# configure
console(config)# lldp timers interval 60 hold 5
reinit 3
2 Enable port 1/0/3 to transmit and receive LLDP PDUs.
console(config)# interface gigabitEthernet1/0/3
console(config-if-Gi1/0/3)# lldp transmit
console(config-if-Gi1/0/3)# lldp receive