Dell PowerConnect M6220, Руководство по настройке пользователя

Страница: 493 / 1294

Configuring Port and System Security
493
2
Click Show All .
The Dot1x Authentication Table displays.
3
Check Edit to select the Units/Ports to re-authenticate.
4
To re-authenticate on a periodic basis, set
Periodic Re-Authentication
to
Enable, and specify a
Re-Authentication Period
for all desired ports.
5
To re-authenticate immediately, check Reauthenticate Now for all ports to
be re-authenticated.
6
Click Apply .
The authentication process is restarted on the specified ports (either
immediately or periodically).
Changing Administrative Port Control
To change the administrative port control:
1 Open the Dot1x Authentication page.
2 Click Show All .
The Dot1x Authentication Table displays.
3 Scroll to the right side of the table and select the Edit check box for each
port to configure. Change Admin Port Control to Authorized ,
Unauthorized , or Automode as needed for chosen ports. Only MAC-
Based and Automode actually use 802.1X to authenticate. Authorized and
Unauthorized are manual overrides.
4 Click Apply .
Admin Port Control is updated for the specified ports, and the device is
updated.
Authenticated Users
The Authenticated Users page is used to display lists of ports that have
authenticated users.
To display the
Authenticated Users page, click Switching
→
Network
Security
→
Authenticated Users in the navigation panel.