NOTE:
Display cable should be routed above the WWAN antennas (for models shipped with a WWAN card), and then
secured with conductive tape on the palm rest.
5. Install the:
a.
b.
After working inside your computer
.
M2. SATA Solid State Drive (SSD)
Removing the M2. SSD card
Before working inside your computer
.
2. Remove the:
a.
b.
3. To remove the Solid State Drive (SSD) card:
a. Remove the two (M2x3) screws that secures the SSD bracket to the system [1], and lift the bracket from the system
[2]..
b. Slide and lift the SSD from the system [3].
Installing the M2. SSD card
1. Insert the SSD card into its slot on the system.
Disassembly and reassembly
27
