Steps
1. Align the round notch on the M.2 2230 solid-state drive with the screw (M2x2) on the M.2 2230 solid-state drive bracket.
2. Tighten the screw (M2x1.8) that secures the M.2 2230 solid-state drive to the M.2 2230 solid-state drive bracket.
3. Turn over the M.2 2230 solid-state drive bracket.
4. Slide the M.2 2230 solid-state drive bracket into the M.2 card slot on the system board.
5. Replace the screw (M2x3) that secures the M.2 2230 solid-state drive bracket to the system board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
Removing the M.2 2280 solid-state drive
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
26
Removing and installing components
Содержание P157G
Страница 14: ...14 Removing and installing components ...
