About this task
The following images indicate the location of the camera module (in a system shipped with plastic chassis) and provide a visual
representation of the installation procedure.
Steps
1. Adhere the camera module in its slot on the display assembly.
2. Connect the camera cable to the camera module.
Next steps
1. Install the
2. Install the
3. Install the
.
4. Install the
5. Install the
6. Install the
.
7. Install the
.
8. Install the
.
9. Install the
.
After working inside your computer
.
Removing the camera module (Aluminum)
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
.
6. Remove the
7. Remove the
8. Remove the
.
9. Remove the
.
10. Remove the
Removing and installing components
71
Содержание P152G
