14. Replace the screw (M2x3) that secures the display-cable bracket to the system board.
15. Adhere the tape that secures the display-cable bracket to the system board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
I/O board
Removing the I/O board
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
About this task
The following image(s) indicate the location of the I/O board and provides a visual representation of the removal procedure.
Steps
1. Lift the I/O-board cable-connector latch and disconnect the I/O-board cable from the I/O board.
2. Remove the screw (M2x3) that secures the left-display hinge to the palm-rest and keyboard assembly.
3. Remove the screw (M2x4) that secures the left-display hinge to the palm-rest and keyboard assembly.
4. Pry open the left-display hinge.
5. Remove the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
Removing and installing components
41
