Dell P114G Скачать руководство пользователя страница 40

Страница: 40 / 57

Table 3. General (continued)

Option

Description

Boot Sequence

Allows you to specify the order in which the computer attempts to find an operating system
from the devices specified in this list.

Advanced Boot Options

Allows you to select the Legacy Option ROMs option, when in UEFI boot mode. By default,
no option is selected.

●

Enable Legacy Option ROMs

●

Enable Attempt Legacy Boot

UEFI Boot Path Security

This option controls whether or not the system will prompt the user to enter the Admin
password when booting a UEFI boot path from the F12 Boot Menu.

●

Always, Except Internal HDD—Default

●

Always

●

Never

Date/Time

Allows you to set the date and time settings. Changes to the system date and time take
effect immediately.

System information

Table 4. System Configuration

Option

Description

Integrated NIC

Allows you to configure the on-board LAN controller.

●

Disabled = The internal LAN is off and not visible to the operating system.

●

Enabled = The internal LAN is enabled.

●

Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default)

SATA Operation

Allows you to configure the operating mode of the integrated hard drive controller.

●

Disabled = The SATA controllers are hidden

●

AHCI = SATA is configured for AHCI mode

●

RAID ON = SATA is configured to support RAID mode (selected by default)

Drives

Allows you to enable or disable the various drives on-board:

●

SATA-0 (enabled by default)

●

SATA-1 (enabled by default)

●

SATA-2 (enabled by default)

●

M.2 PCIe SSD-0 (enabled by default)

Smart Reporting

This field controls whether hard drive errors for integrated drives are reported during system
startup. The

Enable Smart Reporting option

is disabled by default.

USB Configuration

Allows you to enable or disable the integrated USB controller for:

●

Enable USB Boot Support

●

Enable External USB Port

All the options are enabled by default.

Audio

Allows you to enable or disable the integrated audio controller. The option

Enable Audio

selected by default.

●

Enable Microphone

●

Enable Internal Speaker

Both the options are selected by default.

Miscellaneous Devices

Allows you to enable or disable the following devices:

●

Enable Camera (enabled by default)

BIOS setup

Содержание P114G


























































Результаты поиска

Содержание P114G

Отзывы:

Похожие инструкции для P114G

Бренды по названию

Популярные бренды

Dell P114G, Руководство по обслуживанию

Результаты поиска

Содержание P114G

Отзывы:

Похожие инструкции для P114G

Бренды по названию

Популярные бренды