1. Adhere the coin-cell battery to the slot on the palm-rest and keyboard assembly.
2. Route the coin-cell battery cable through the routing guide.
3. Connect the coin-cell battery cable to the system board.
1. Install the
.
2. Install the
.
After working inside your computer
.
Solid-state drive
Removing the M.2 2280 solid-state drive
Before working inside your computer
.
2. Remove the
.
3. Remove the
.
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
16
Removing and installing components
