Dell P102F, Руководство по обслуживанию

Страница: 28 / 93

Steps
1. Align the support bracket to accommodate the M.2 2280 solid-state drive.
2. Gently slide the solid-state drive into the solid-state drive slot on the system board.
3. Replace the single (M2x3) screw to secure the solid-state drive module to the palm-rest and keyboard assembly.
Next steps
1. Install the battery .
2. Install the base cover .
3. Follow the procedure in after working inside your computer .
Removing the M.2 2230 solid-state drive - SSD-2
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the base cover .
3. Remove the battery .
NOTE: Depending on the configuration ordered, your computer may support a 2230 solid-state drive or a 2280 solid-state
drive in M.2 slot one.
NOTE: M.2 slot two supports one PCIe Gen3 x4 NVMe or SATA solid-state drive (M.2 2230 or M.2 2280) or one Intel
Optane memory H10 with solid state storage.
About this task
The figure indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the removal procedure
from SSD slot two:
28 Disassembly and reassembly