•
HDMI 2.0 for Discrete Graphics
5. RJ-45 port 10/100/1000 Mbps
6. USB 3.2 Gen 2 Type-A ports with Smart Power On
7. USB 3.2 Gen 2 Type-A ports
8. Line-out audio port
9. Power connector
10. PSU status indicator LED
Bottom
1. Display Built-in Self Test button/Input-source selection button
This button has two functions:
•
When the computer is on, use this button to select the video input-source.
Press the button to switch the display between the internal system display and HDMI input.
•
When the computer is off (there is no power; neither is it in sleep state nor hibernate state), use this button to run the built-in self-
test for the display.
Press and hold down this button, and then press the power button to turn on the computer. The built-in color pattern for the LCD
monitor will appear on the screen.
For more information, see the
Troubleshooting
section in the
Service Manual
at
.
2. Service tag label
Views of OptiPlex 7780 All-in-One
15
Содержание OptiPlex 7780 All-In-One
Страница 4: ...Set up your computer 1 Set up the stand Figure 1 Articulating stand 1 4 Set up your computer ...
Страница 6: ...3 Route the power cable through the stand then connect the power cable 6 Set up your computer ...
Страница 7: ...4 Press the power button Set up your computer 7 ...
Страница 13: ...Right 1 Hard drive status indicator Views of OptiPlex 7780 All in One 13 ...
