Dell OptiPlex 5050 Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 68

background image

Table 15. Virtualization Support

Option

Description

Virtualization

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel® Virtualization Technology.

Enable Intel Virtualization Technology

-

This option is enabled by default.

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware
capabilities provided by Intel® Virtualization technology for direct I/O.

Enable VT for Direct I/O

-

This option is enabled by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional

hardware capabilities provided by the Intel Trusted Execution Technology. This option is disabled by

default.

Table 16. Maintenance

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is set by default.

SERR Messages

Controls the SERR message mechanism. This option is set by default. Some graphics cards require
that the SERR message mechanism be disabled.

BIOS Downgrade

Allows you to control flashing of the system firmware to the previous versions. This option is enabled
by default.

NOTE:

If this option is not selected, the flashing of the system firmware to the previous

versions is blocked.

Data Wipe

Allows you to securely erase the data from all the available internal storages, such as HDD, SSD,
mSATA, and eMMC. The option “Wipe on Next Boot” is disabled by default.

BIOS recovery

Allows you to recover the corrupted BIOS conditions from the recovery files on the primary hard
drive. The option

BIOS Recovery from Hard Drive

is selected by default.

Table 17. System Logs

Option

Description

BIOS Events

Displays the system event log and allows you to:

•

Clear Log

•

Mark all Entries

Updating the BIOS in Windows

It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is available. For laptops, ensure that
your computer battery is fully charged and connected to a power outlet

NOTE:

If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re-enabled after the BIOS

update is completed.

1

Restart the computer.

2

Go to

Dell.com/support

.

•

Enter the

Service Tag

or

Express Service Code

and click

Submit

.

•

Click

Detect Product

and follow the instructions on screen,

3

If you are unable to detect or find the Service Tag, click the

Choose from all products

.

4

Choose the

Products

category from the list.

System setup

53

«
...
51
52
53
54
55
...
»

Содержание OptiPlex 5050





































































Отзывы:

Нет отзывов

Похожие инструкции для OptiPlex 5050

Бренд: Ace Страницы: 17

Бренд: Medion Страницы: 92

Бренд: Kontron Страницы: 72

Бренд: Compaq Страницы: 2

Бренд: Cartft Страницы: 10

Бренд: Gateway Страницы: 346

Бренд: Elo TouchSystems Страницы: 3

Бренд: Asus Страницы: 87

UNO-3200G Series

Бренд: Advantech Страницы: 50

Бренд: Advantech Страницы: 52

Бренд: Advantech Страницы: 52

Бренд: Advantech Страницы: 2

ITA-5231 Series

Бренд: Advantech Страницы: 5

IACP-4000 Series

Бренд: Advantech Страницы: 28

DLoG DLT-V72 Series

Бренд: Advantech Страницы: 98

ARK-5420 Series

Бренд: Advantech Страницы: 80

Бренд: Advantech Страницы: 52

ARK-3381 Series

Бренд: Advantech Страницы: 86

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды