Installing the expansion card
1.
Insert the expansion card into the connector on the system board.
2.
Press the expansion card until it clicks into place.
3.
Close the expansion card latch and press it until it clicks into place.
4.
Install the:
a.
b.
5.
After Working Inside Your Computer
Removing the system fan
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
d.
3.
To remove the system fan:
a. Disconnect the system fan cable from the system board [1].
b. Slide the fan grommets toward the slot on the back wall [2].
c. Lift the fan away from the computer. [3]
17
Содержание OptiPlex 5040 Series
Страница 1: ...OptiPlex 5040 Small Form Factor Owner s Manual Regulatory Model D11S Regulatory Type D11S001 ...
Страница 7: ...5 If required verify that the computer works correctly by running Dell Diagnostics 7 ...
Страница 30: ...29 Internal USB connector 30 SATA1 connector 31 Coin cell battery 30 ...
