Steps
1. Align the notch on the solid-state drive with the tab on the M.2 card slot.
2. Slide the solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x2.5) to secure the solid-state drive to the system board.
Next steps
1. Install the
2. Install the
3. Install the
4. Install the
.
After working inside your computer
.
Removing the M.2 2280 solid-state drive/Intel Optane memory
module
Prerequisites
Before working inside your computer
.
2. Remove the
.
3. Remove the
(optional).
4. Remove the
.
5. Remove the
.
About this task
The following image indicates the location of the solid-state drive and provides a visual representation of the removal procedure.
32
Removing and installing components