Dell OptiPlex 3280, Руководство по обслуживанию, Страница: 28 / 96

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
NOTE: Repeat step 1 and 2 if there are two memory modules.
3. Align the tabs on the DIMM door with the slots on the system-board shield and snap it into place.
NOTE: Repeat step 1 and 2 if there are two memory modules.
Next steps
1. Install the back cover
2. Install the cable cover (optional).
3. Install the stand .
4. Follow the procedure in After working inside your computer .
System-board shield
Removing the system-board shield
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the stand .
3. Remove the cable cover (optional).
4. Remove the back cover .
28 Removing and installing components