Dell Olympus O-T600, Инструкция по установке и обслуживанию

Страница: 33 / 136

Figure 23. Installing the system feet
Next steps
1. Place the system upright on a flat, stable surface, and rotate the system feet outward.
2. Follow the procedure listed in
After working inside your system on page 28.
Caster wheels – optional
Removing caster wheels
Prerequisites
1. Follow the safety guidelines listed in Safety instructions on page 27.
2. Place the system on a flat, stable surface.
Steps
1. Using the Phillips #2 screwdriver, loosen the captive screw that secures the front wheel unit to the base of the system.
2. Push the front wheel unit toward the rear of the system to release the retention hooks, and pull out the front wheel unit.
3. Loosen the screw that secures the back wheel unit to the base of the chassis.
4. Push the rear wheel unit toward the front of the system to release the retention hooks, and pull out the rear wheel unit.
32 Installing and removing system components