Dell Networking S6000 System, Справочное руководство

Страница: 792 / 1510

clear isis
Restart the IS-IS process. All IS-IS data is cleared.
S6000
Syntax
clear isis [ tag ] {* | database | traffic}
Parameters
tag (Optional) Enter an alphanumeric string to specify the IS-IS
routing tag area.
* Enter the keyword
*
to clear all IS-IS information and restart
the IS-IS process. This command removes IS-IS neighbor
information and IS-IS LSP database information and the full
SPF calculation is done.
database Clears IS-IS LSP database information.
traffic Clears IS-IS counters.
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
clns host
Define a name-to-network service mapping point (NSAP) that you use with commands that require
NSAPs and system IDs.
S6000
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP
mapping.
792
Intermediate System to Intermediate System (IS-IS)