Dell Networking S6000 System, Справочное руководство

Страница: 511 / 1510

stack-unit
number
Enter the keywords
stack-unit
then a number to select a
stack ID. The range is 0 to 5 for the S6000.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The
range is 0 to 0 for the S6000.
Defaults none
Command
Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.0 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
S6000
Syntax
stack-unit <id> {cpu data-plane statistics | cpu management
statistics | [ drops [unit number [port 1-104] | user-port
0-127] | fpga register | party-bus statistics | stack-port |
ti-monitor | unit 0-1 {counters | details | port-stats [detail]
| register}}
Parameters
stack-unit
stack-unit
{command-
option}
Enter the keywords
stack-unit
to select a particular stack
member and then enter one of the following command
options to display a collection of data based on the option
entered. The range is from 0 to 5.
buffer Enter the keyword
buffer
. To display the total buffer
statistics for the stack unit, enter the keyword
total-
buffer
. To display the buffer statistics for a specific unit,
enter the keyword
unit
and a unit number 0 or 3.
To display the buffer statistics for a specific port, enter the
keyword
port
and a port number from 1 to 104.
Debugging and Diagnostics
511