manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство, Страница: 151 / 1510

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 151

dot1x auth-server

Configure the authentication server to RADIUS.

S6000

Syntax

dot1x auth-server radius

Defaults

none

Command 
Modes

CONFIGURATION

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 9.0.0.0

Introduced on the Z9000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 
8.3.12.0

Introduced on the S4810.

Version 8.3.11.1

Introduced on the Z9000.

Version 7.6.1.0

Introduced on the C-Series and S-Series.

Version 7.4.1.0

Introduced on the E-Series.

dot1x auth-type mab-only

To authenticate a device with MAC authentication bypass (MAB), only use the host MAC address.

S6000

Syntax

dot1x auth-type mab-only

Defaults

Disabled

Command 
Modes

INTERFACE

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

802.1X

151

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов