Dell Networking S6000 System, Справочное руководство

Страница: 142 / 1510

terminal length
Configure the number of lines displayed on the terminal screen.
S6000
Syntax
terminal length screen-length
Parameters
screen-length Enter a number of lines. Entering zero causes the terminal to
display without pausing. The range is from 0 to 512.
Defaults 24 lines
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0 Introduced on the S4820T.
Version
8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
traceroute
View a packet’s path to a specific device.
S6000
Syntax
traceroute { host | vrf instance | ip-address | ipv6-address }
traceroute { host | ip-address | ipv6-address }
142
Control and Monitoring