manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство, Страница: 141 / 1510

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 141

Version 
8.3.12.0

Introduced on the S4810. Added support for 

source-

interface

 for link-local IPv6 addressing.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.2.1.0

Introduced on the E-Series ExaScale (IPv6). Increased the 
number of VLANs on ExaScale to 4094 (was 2094).

Version 8.1.1.0

Introduced on the E-Series ExaScale (IPv4).

Version 7.9.1.0

Introduced VRF.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series and added support for IPv6 
address on the E-Series only.

Example

Dell(conf)#do telnet vrf vrf1 10.10.10.2 

telnet-peer-stack-unit

Open a Telnet connection to the peer stack unit.

Syntax

telnet-peer-stack-unit

Defaults

Not configured.

Command 
Modes

• EXEC
• EXEC Privilege

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Introduced on the S6000.

Version 9.0.0.0

Introduced on the Z9000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 
8.3.12.0

Introduced on the S4810.

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.11.1

Introduced on the S-Series.

Control and Monitoring

141

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов