Dell Networking S6000 System, Справочное руководство

Страница: 1263 / 1510

tacacs-server host
Specify a host.
S6000
Syntax
tacacs-server host { hostname | ipv4-address | ipv6-address }
[port number ] [timeout seconds ] [key key ]
Parameters
hostname Enter the name of the server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X)
of the server host.
port number (OPTIONAL) Enter the keyword
port
then a number as the
port to be used by the server. The range is from
zero (0) to 65535. The default is
49 .
timeout
seconds
(OPTIONAL) Enter the keyword
timeout
then the number of
seconds the switch waits for a reply from the
server. The range is from 0 to 1000. The default is
10
seconds .
key key
(OPTIONAL) Enter the keyword
key
then a string up to 42
characters long as the authentication key. This
authentication key must match the key specified in the
tacacs-server key
for the daemon.
Defaults Not configured.
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.4.1.0 Added support for IPv6.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Authentication key length increased to 42 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Security
1263