Dell Networking S6000 System, Справочное руководство

Страница: 1238 / 1510

Parameters
encryption-
type
(OPTIONAL) Enter the number
7
as the encryption type.
Enter
7
followed a text string as the hidden password. The
text string must be a password that was already encrypted by
a Dell Networking router.
Use this parameter only with a password that you copied
from the
show running-config
file of another Dell
Networking router.
password Enter a text string, up to 32 characters long, as the clear text
password.
Defaults Not configured.
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information Only Dell Networking Technical Support staff use this command.
enable secret
Change the password for the
enable
command.
S6000
Syntax
enable secret [level level ] [ encryption-type ] password
To delete a password, use the
no enable secret [ encryption-type ]
password [level level ]
command.
Parameters
level level (OPTIONAL) Enter the keyword
level
then a number as the
level of access. The range is from 1 to 15.
1238
Security