Dell Networking S6000 System, Справочное руководство

Страница: 1187 / 1510

Command
Modes ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
Usage
Information If you change the timers on one router, also synchronize the timers on all routers
in the RIP domain.
version
Specify either RIP version 1 or RIP version 2.
S6000
Syntax
version {1 | 2}
To return to the default version setting, use the
no version
command.
Parameters
1 Enter the keyword
1
to specify RIP version 1.
2 Enter the keyword
2
to specify RIP version 2.
Defaults The Dell Networking OS sends RIPv1 and receives RIPv1 and RIPv2.
Command
Modes ROUTER RIP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Routing Information Protocol (RIP)
1187