Dell Networking S6000 System, Справочное руководство

Страница: 1143 / 1510

Example
Dell(conf-if-te-0/8)#Service-class buffer shared-threshold-
weight queue5 4 queue7 6
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
S6000
Syntax
test cam-usage service-policy input policy-map stack-unit
{[ number port-set portpipe number ] | [all]}
Parameters
policy-map Enter the policy map name.
stack-
unit
number
(OPTIONAL) Enter the keyword
stack-unit
then the stack-
unit slot number.
port-set
portpipe
number
Enter the keywords
port-set
then the stack-unit port pipe
number. The range is from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords
stack-unit
all to indicate
all stack-unit.
Defaults none
Command
Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Usage
Information
This feature allows you to determine if the CAM has enough space available before
applying the configuration on an interface.
An input policy map with both Trust and Class-map configuration, the Class-map
rules are ignored and only the Trust rule is programmed in the CAM. In such an
instance, the Estimated CAM output column contains the size of the CAM space
required for the Trust rule and not the Class-map rule.
The following describes the
test cam-usage service-policy input
policy-map stack-unit
command shown in the following example.
Quality of Service (QoS)
1143