Dell Networking S6000 System, Справочное руководство

Страница: 1116 / 1510

no Negate a command or set its defaults
show Show buffer-stats-snapshot
configuration
Dell(conf-buffer-stats-snapshot)#no disable
Dell(conf-buffer-stats-snapshot)#show configuration
!
buffer-stats-snapshot
no disable
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-
service policies to each class.
S6000
Syntax
class-map {match-all | match-any} class-map-name [cpu-qos]
[layer2]
Parameters
match-all Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords
match-all
to determine
that the packets must meet all the match criteria in order to
be a member of the class.
match-any Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords
match-any
to determine
that the packets must meet at least one of the match criteria
in order to be a member of the class.
class-map-
name Enter a name of the class for the class map in a character
format (32 character maximum).
cpu-qos Enter the keyword
cpu-qos
to assign this Class Map to
control plane traffic only (CoPP).
layer2 Enter the keyword
layer2
to specify a Layer 2 Class Map.
The default is Layer 3 .
Defaults Layer 3
Command
Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant
Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
1116
Quality of Service (QoS)