manualshive.com logo in svg

Dell Networking S6000 System, Справочное руководство

Поделиться
Скачать
Dell Networking S6000 System Скачать руководство пользователя страница 1031

show ip ospf interface

Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated.

S6000

Syntax

show ip ospf [

process-id

 | vrf 

vrf-name

] interface [

interface

]

Parameters

process-id

Enter the OSPF Process ID to show a specific process. If no 
Process ID is entered, command applies only to the first 
OSPF process.

vrf 

vrf-name

Enter the keyword 

vrf

 followed by the name of the VRF to 

show the OSPF processes that are tied to a specific VRF.

interface

(OPTIONAL) Enter the following keywords and slot/port or 
number information:

• For the null interface, enter the keyword 

null

 then zero 

(0).

• For loopback interfaces, enter the keyword 

loopback 

then a number from 0 to 16383.

• For tunnel interfaces, enter the keyword 

tunnel

 then a 

number from 0 to 16383.

• For Port Channel groups, enter the keywords 

port-

channel

 then a number. The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 then the slot/port information.

• For a VLAN, enter the keyword 

vlan

 then the VLAN ID. 

The range is from 1 to 4094.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 then the slot/port information.

Command 
Modes

• EXEC
• EXEC Privilege

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant 

Dell Networking OS Command Line Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version 9.4.
(0.0)

Added support for VRF.

Version 9.0.2.0

Introduced on the S6000.

Version 
8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1

Introduced on the Z9000.

Open Shortest Path First (OSPFv2 and OSPFv3)

1031

Содержание Networking S6000 System







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды