Dell N1100-ON, Справочное руководство

Страница: 946 / 2332

Security Commands
946
Example
The following example displays how to specify TACACS server port number
1200.
console(config-tacacs)#port 1200
priority
Use the priority command in TACACS Configuration mode to specify the
order in which servers are used, where 0 (zero) is the highest priority.
Syntax
priority [priority]
• priority — Specifies the priority for servers. 0 (zero) is the highest priority.
(Range: 0–65535).
Default Configuration
If left unspecified, this parameter defaults to 0 (zero).
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to specify a server priority of 10000.
console(config-tacacs)#priority 10000
show tacacs
Use the show tacacs command to display the configuration and statistics of a
server.
Syntax
show tacacs [ip-address]