Dell N1100-ON, Справочное руководство

Страница: 732 / 2332

Layer 2 Switching Commands
732
console(config-mst)#instance 1 add vlan 3000-4093
console(config-mst)#instance 2 add vlan 200-349
console(config-mst)#instance 2 add vlan 351-399
console(config-mst)#instance 2 add vlan 450-499
console(config-mst)#instance 2 add vlan 2000-2199
console(config-mst)#instance 2 add vlan 2500-2599
console(config-mst)#instance 2 add vlan 2800-2999
console(config-mst)#exit
console(config)#interface te1/1/1
console(config-if-Te1/1/1)#switchport mode trunk
console(config-if-Te1/1/1)#switchport trunk allowed vlan add 2-150
console(config-if-Te1/1/1)#spanning-tree mst 1 port-priority 16
console(config-if-Te1/1/1)#interface te1/1/2
console(config-if-Te1/1/2)#switchport mode trunk
console(config-if-Te1/1/2)#switchport trunk allowed vlan add 200-349
console(config-if-Te1/1/2)#spanning-tree mst 2 port-priority 16
console(config-if-Te1/1/2)#exit
name (mst)
Use the name command in MST mode to define the region name. To return
to the default setting, use the no form of this command.
Syntax
name string
• string — Case sensitive MST configuration name. (Range: 1-32
characters)
Default Configuration
Bridge address.
Command Mode
MST mode
User Guidelines
When configuring the switch in MSTP mode, be sure to configure the MST
region name. For multiple switches to become members of the same region,
the configuration name, the configuration revision and mapping of VLANs to
MSTIs must be identical.