Dell N1100-ON, Справочное руководство

Страница: 306 / 2332

Layer 2 Switching Commands
306
Example
In this example, all classes of entries in the bridge-forwarding database for
Gigabit Ethernet interface 1/0/1 are displayed.
console#show mac address-table interface gigabitethernet 1/0/1
Aging time is 300 Sec
Vlan Mac Address Type Port
---- -------------- ---- -------------
1 0000.0001.0000 Dynamic Gi1/0/1
1 0000.8420.5010 Dynamic Gi1/0/1
1 0000.E26D.2C2A Dynamic Gi1/0/1
1 0000.E89A.596E Dynamic Gi1/0/1
1 0001.02F1.0B33 Dynamic Gi1/0/1
show mac address-table static
Use the show mac address-table static command in User Exec or Privileged
Exec mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [ address mac-address] [ interface interface-id]
[ vlan vlan-id]
•
mac-address
—
A MAC address with the format xxxx.xxxx.xxxx.
•
interface-id
—
Specify an interface type; valid interfaces include Ethernet ports
and port channels.
•
vlan-id
—
Specify a valid VLAN; the range is 1 to 4093.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.