Dell N1100-ON, Справочное руководство

Страница: 285 / 2332

Layer 2 Switching Commands
285
TCP Flags...................................... FIN (Ignore)
SYN (Set)
RST (Ignore)
PSH (Ignore)
ACK (Ignore)
URG (Ignore)
ACL Hit Count.................................. 1
show mac access-lists
Use the show mac access-lists command to display a MAC access list and all
the rules that are defined for the MAC ACL. Use the [
name] parameter to
identify a specific MAC ACL to display.
Syntax
show mac access-lists name
• name—Use this parameter to identify the specific MAC ACL to display.
Default Configuration
This command has no default configuration
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The hit counter applies to the ACL, not to the interface. It shows the sum of
all matching packets across all interfaces to which the ACL is applied. For an
ACL applied to multiple interfaces, the hit counter will be identical for all
interfaces.
Command History
Updated in 6.3.0.1 firmware. Updated User Guidelines in 6.3.0.5 firmware.
Example
console#show mac access-lists
Current number of all ACLs: 9 Maximum number of all ACLs: 100