Dell N1100-ON, Справочное руководство

Страница: 2269 / 2332

Switch Management Commands
2269
Web Server Commands
If enabled, the Dell EMC Networking is manageable via industry standard
web browsers. User privilege levels are the same as for the CLI. Over 95% of
the management functions are available via the web interface, including
configuration and firmware upgrades.
Web Sessions
The HTTP protocol does not provide support for persistent connections.
Connections are constantly made and broken so there is no way to know who
is accessing the web interface or for how long they are doing so. Additionally,
with the use of basic authentication the user authorization is handled by the
client browser. This means that once entered, the user name and password are
cached in the browser and given to the server on request. Effectively, once a
user logs in to the switch, they have access until the browser closes, even
across reboots of the switch. This poses a security threat.
The Web Sessions feature makes use of cookies to control web connections,
sessions. Cookies must be enabled on the browser. The Set-Cookie directive is
sent only once at initiation of the session. With the introduction of Web
Sessions the client connections can be monitored and controlled. Web
Sessions put the authentication control in the Dell EMC Networking switch
instead of the client browser resulting in a more efficient implementation
that allows web access while using Radius or for authentication.
The exec-timeout command in line telnet command mode also sets the
timeout for the web interface.
The web login is implemented in the login page itself instead of a client
browser popup. Additionally, there is a logout button, always present on the
web interface. There are various commands that have been modified or added
to support Web Sessions. Similarly there are modifications to some of the
web pages. Support of SNMP configuration for Web Sessions is also available.
When the authentication method set for web login authentication is set to
, the exec shell configuration on the server is used to
determine user permissions (read-only or read/ write). If the configured value
on the server is 15, the user is given read-write permissions. Any other value is
read-only. If exec shell feature is not enabled on the server, the user is given
read-only permissions.