Dell N1100-ON, Справочное руководство

Страница: 1842 / 2332

Switch Management Commands
1842
User Guidelines
This command is intended to give the administrator an easy way to remember
which macros have been applied globally. All text up to the new line is
included in the description. The line is appended to the global description.
macro apply
Use the macro apply command in Interface Configuration mode to apply a
macro.
Syntax
macro apply macro - name [parameter value] [parameter value][parameter
value]
• macro-name—The name of the macro.
• parameter—The name of the parameter recognized by the macro. The
parameter must begin with a dollar sign ($).
• value—The string to be substituted within the macro for the specified
parameter name.
Default Configuration
No parameters are substituted unless supplied on the command line.
Command Mode
Interface Configuration mode
User Guidelines
Commands applied are additive in nature. That is, they do not remove
existing configuration information by default.
macro trace
Use the macro trace command in Interface Configuration mode to apply and
trace a macro. The command will display each line of the macro as it is
executed and list any errors encountered.